Creation of a jewel
1º Design
Our design team has developed several designs based on the latest trends, seeking to meet the needs and wishes of market.
2º Preparation of the mold in wax
Cut the tube of wax.
2º Preparation of the mold in wax
Determine and shape the wax in order to obtain the desired shape.
2º Preparation of the mold in wax
Try the stone or stones, for which the ring is being created.
2º Preparation of the mold in wax
Try the stone or stones, for which the ring is being created.
2º Preparation of the mold in wax
Determine and shape the wax in order to obtain the desired shape.
2º Preparation of the mold in wax
Final result in wax.
2º Preparation of the mold in wax
Final result in wax.
Preparation of rubber (silicone mold) and injection waxes in series
Aluminum frame, where they are placed several layers of silicone (or rubber), in order to vulcanize rubber. (in negative mold made of the piece and where it is injected wax in order to obtain the desired number of pieces, all the same).
Preparation of rubber (silicone mold) and injection waxes in series
Vulcanizer, where the landmark is stuck at a certain temperature and pressure. After about 45 minutes the rubber is ready.
Preparation of rubber (silicone mold) and injection waxes in series
Cut the rubber, which is made with a scalpel in order to be removed from the mold in silver.
Preparation of rubber (silicone mold) and injection waxes in series
Cutting result.
Preparation of rubber (silicone mold) and injection waxes in series
Adapter with the rubber already coded and ready to be inserted into the machine in order to be injected to the inside and get several matching tiles.
Preparation of rubber (silicone mold) and injection waxes in series
Assembling the trees of the molds in wax.
Preparation of rubber (silicone mold) and injection waxes in series
Assembling the trees of the molds in wax.
Preparation of rubber (silicone mold) and injection waxes in series
Assembling the trees of the molds in wax.
Preparation of rubber (silicone mold) and injection waxes in series
Make a tree with several previously injected wax, which is composed of a main trunk, which parts are welded by heat.
Preparation of rubber (silicone mold) and injection waxes in series
Make a tree with several previously injected wax, which is composed of a main trunk, which parts are welded by heat.
Preparation of rubber (silicone mold) and injection waxes in series
Make a tree with several previously injected wax, which is composed of a main trunk, which parts are welded by heat.
Preparation of rubber (silicone mold) and injection waxes in series
Make a tree with several previously injected wax, which is composed of a main trunk, which parts are welded by heat.
Filling the cylinder (with trees inside) and plaster casting of metal
Foundry Section.
Filling the cylinder (with trees inside) and plaster casting of metal
Machine, put the plaster - where the whole process is done in a vacuum.
Filling the cylinder (with trees inside) and plaster casting of metal
Cylinders with the cast as cocky and ready to put in the oven.
Filling the cylinder (with trees inside) and plaster casting of metal
Metal injection molding machine (orange) and oven.
Filling the cylinder (with trees inside) and plaster casting of metal
Cylinders already in the oven, where they will fulfill a cycle of about fourteen hours and in various heights, which will come in and make a wax cast of the cooking to be injected inside the metal.
Filling the cylinder (with trees inside) and plaster casting of metal
Metal injection into the machine.
Filling the cylinder (with trees inside) and plaster casting of metal
Metal has melted and the temperature to be inserted into the cylinder.
Filling the cylinder (with trees inside) and plaster casting of metal
Process of removing the cylinder from the oven to melt the ideal temperature, is then placed in metal injection molding machine in order to be filled with the respective metal.
Filling the cylinder (with trees inside) and plaster casting of metal
Process of removing the cylinder from the oven to melt the ideal temperature, is then placed in metal injection molding machine in order to be filled with the respective metal.
Filling the cylinder (with trees inside) and plaster casting of metal
Process of removing the cylinder from the oven to melt the ideal temperature, is then placed in metal injection molding machine in order to be filled with the respective metal.
Filling the cylinder (with trees inside) and plaster casting of metal
With the metal cylinder has injected.
Filling the cylinder (with trees inside) and plaster casting of metal
After about 15 minutes the cylinder is enclosed in cold water to be extracted from inside the tree has metal.
Filling the cylinder (with trees inside) and plaster casting of metal
After about 15 minutes the cylinder is enclosed in cold water to be extracted from inside the tree has metal.
Filling the cylinder (with trees inside) and plaster casting of metal
After about 15 minutes the cylinder is enclosed in cold water to be extracted from inside the tree has metal.
Filling the cylinder (with trees inside) and plaster casting of metal
Cleaning the rest of plaster that is still clinging to the tree (jet machine water pressure).
Filling the cylinder (with trees inside) and plaster casting of metal
Cleaning the rest of plaster that is still clinging to the tree (jet machine water pressure).
Filling the cylinder (with trees inside) and plaster casting of metal
Silver Tree.
Filling the cylinder (with trees inside) and plaster casting of metal
Yellow Gold Tree.
Filling the cylinder (with trees inside) and plaster casting of metal
Tree White Gold.
Filling the cylinder (with trees inside) and plaster casting of metal
Golden Rose Tree.
Manual finishing on stands
Various stages of manual finishing.
Manual finishing on stands
Various stages of manual finishing.
Manual finishing on stands
Various stages of manual finishing.
Manual finishing on stands
Laser welding machine.
Crimping (Fouling stones in pieces)
Collage by heat, parts of the seal.
Crimping (Fouling stones in pieces)
Various stages of crimping.
Crimping (Fouling stones in pieces)
Laser welding machine.
Finishing - Polishing
Section Polishing
Finishing - Polishing
Section Polishing
Finishing - Polishing
Sanding and polishing.
Finishing - Polishing
Sanding and polishing.